11 useful advices
Sanitary works
1. Work in hot water, you may protect your hands from burns by two-layer gloves. First thin woolen gloves and then the rubber gloves are put on.
2. If the gate on an input of a water highway in an apartment not completely blocks water, and it is necessary to repair the crane on kitchen, it is possible to open the crane in a bath, to turn out the faulty crane, and to cork its jack quickly. Water will flow down in a bath. After the repair take out a fuse and screw the crane on the place.
3. If the rubber hose is great and does not keep on the water crane, you may cut out on the end of a hose a wedge and densely pull together a hose in a place of isolating cut with a tape, having created a strong covering ring.
Electrotechnical works
4. The emery paper pasted on a plate, will help to clear a sting of a soldering iron of stratifications of scale and deposit.
5. It is possible to use a soldering iron for removal of a varnish covering from a surface of a thin wire (diameter 0,2 mm and less): put a wire on a wooden support and lead a hot sting of a soldering iron on it.????
Painting works
6. It is not obligatory to spoil a brush for a propaint of small surface. It is possible to take advantage of a slice of foam rubber and we advise you to clamp foam rubber in a bracket bent from a strip of a tin in order to avoid coloring your fingers.
7. After work with a varnish the brush can be put in water (if there is no organic solvent). In a day the varnish will be friable and it can be removed from brush with warm water and soap.
8. The stirred paint with the rests of a film can be not filtered. It is necessary to pour a paint into superficial to bank, to put a piece of a kapron stocking there and to dip brush in a paint through it. If the paint is made on nitrocellulose basis, it is necessary to take advantage not of kapron, but of gauze.
Joinerworks
9. Screws and the nails polished by soap or greased by vegetable oil will enter into the firmest wood easier.
10. If the screw connecting details is turned at screwing in, it can be fixed, preliminary having inserted into an aperture of one or several matches, greased by glue.
11. Traces from impact of a hammer on shaving log can be removed if you will put a piece of a wet fabric on this place.
????
????